CALL OUR EDM TECH HOTLINE 800-346-9004

About: Equipment

Large CNC Wire EDM Machines
  • 2 Mitsubishi MV4800, 31.5”x23.5”x32”
  • 1 Mitsubishi FA30V, 29.5" x 19.6" x 26.5"
  • 1 Mitsubishi DWC400H1, 31.5"x 39.3"x17"
  • 1 Mitsubishi DWC300HA, 19.6"x39.3"x18"
  • 1 Mitsubishi DWC200HA, 15.7"x29.5"x10.5"
  • 1 Mitsubishi DWC110HA, 11.8"x17.7"x18"
Listed are cutting dimensions. Work piece dimensions are larger.

CNC Production Wire EDM Machines
  • 2 Mitsubishi MV2400ST, 23.6”x 15.7”x 21.2”
  • 14 Mitsubishi MV 1200 S, 15.7”x 11.8”x 8.7”
  • 1 Mitsubishi SX2, 19.6" x 13.7" x 10.5"
  • 1 Mitsubishi SX1, 13.7" x 9.8" x 8.5"
  • 6 Mitsubishi DWC110C2, 11.8" x 17.7" x 10"
  • 1 Mitsubishi DWC90H, 9.8" x 11.8" x 6"
  • 3 Mitsubishi 90H1, 9.8” x 11.8” x 6”
  • 3 Mitsubishi DWC90C, 9.8" x 11.8" x 6"
  • 2 Mitsubishi DWC90HA, 9.8" x 11.8" x 6"
  • 1 Mitsubishi FA10V, 13.7" x 9.8" x 8.6"
  • 1 Mitsubishi FA20V, 19.7" x 13.8" x 12"
  • 2 Mitsubishi FA10S, 13.7”x 9.8”x 8.6”
  • 2 Mitsubishi BA8 (MDPro2), 12.6”x 9.8”x 8.6”
  • 3 Mitsubishi FX10, 13.7" x 9.8" x 8.6"
  • 1 Mitsubishi DWC110SZ, 17.7" x 11.8" x 10.4"
  • 4 Mitsubishi DWC90SB, 11.8" x 9.8" x 6.9"




CNC conventional EDM machines
  • 1 Mitsubishi EA30E Drop Tank, 48”x33.5”x17.1”
  • 1 Mitsubishi EA28 V  Drop Tank Extend Z axis (17.5”) 
  • 1 Mitsubishi EX22FP100
  • 1 Mitsubishi EA12 PS Drop Tank Carbide Circuit
  • 1 Mitsubishi EA 12V Drop Tank
  • 1 Mitsubishi EX8FP60SP Carbide Circuit
  • 1 Mitsubishi M25JC7 G35







CNC hole drilling EDM machines
  • 1 Mitsubishi ED-2000M
  • 1 Current ST300C
  • 1 Belmont ASTEC 2Z400/P3




CNC Machining Centers
  • 1 Mazak V-655 (M32), 26" x 59" x 26", 30 tool changer and touch probe measuring system
  • 1 Mazak VTC-20C (M32), 20" x 65" x 20", 48 tool changer and touch probe measuring system
  • 1 Mazak AVJ-18 (M32), 22" x 16" x 18", 30 tool changer, 10,000 rpm
  • 1 HAAS VF--5-50, 50" x 26" x 25", 30 Tool changer and touch probe measuring system
  • 1 HASS VF4 SS 50” x 20” x 25” through spindle coolant with touch probe measuring



Other Tools
  • 2 Yuasa programmable 4th axis, 8" x 10" servo rotary tables
  • 1 Nardini MS1440E lathe with readout
  • 1 Moore number 1 jig borer, fully tooled
  • 1 Sharp vertical mill
  • 1 Mitsui surface grinder, 6" x 18"
  • 1 Chevalier CNC surface grinder, 12" x 24"
  • 1 Grob vertical band saw
  • 2 Gamm dry blasters
  • 1 Uni-Tek metal disintegrator
  • 1 HEM CNC saw H130HA-DC 18" x 20" capacity

Material Handling Equipment
  • 1 lift truck, 7,000 lb.
  • 1 lift truck, 5,000 lb.
  • 2 overhead cranes, up to 6,000 lb.




Quality Assurance
  • Full quality manual, operating procedures, work instructions, and planned routings.
  • 3 Mitutoyo CNC coordinate measuring machines, 0.000010" resolution
  • 3 OGP Avant AV300 video measuring systems, 0.000010" resolution
  • 1 Dorsey 12" optical comparator, 0.0001" resolution
  • 15 granite surface plates, up to 48" x 72"
  • 1 Rockwell hardness tester
  • 2 Haas indexing tables, +/-1 minute
  • Wide variety of inspection hand tools


Adron Tool Corp.

N85 W13730 Leon RoadMenomonee Falls, WI 53051Ph: 262-255-4433

© Copyright Adron EDM Specialists. All rights reserved.
Web Site Development: Design-2-Part Web Design.Site Map