CALL OUR EDM TECH HOTLINE 800-346-9004

 

About: Equipment

Large CNC Wire EDM Machines

  • 2 Mitsubishi MV4800, 31.5”x23.5”x32”
  • 1 Mitsubishi FA30V, 29.5″ x 19.6″ x 26.5″
  • 1 Mitsubishi DWC400H1, 31.5″x 39.3″x17″
  • 1 Mitsubishi DWC300HA, 19.6″x39.3″x18″
  • 1 Mitsubishi DWC200HA, 15.7″x29.5″x10.5″
  • 1 Mitsubishi DWC110HA, 11.8″x17.7″x18″

Listed are cutting dimensions. Work piece dimensions are larger.

CNC Production Wire EDM Machines

  • 2 Mitsubishi MV2400ST, 23.6”x 15.7”x 21.2”
  • 14 Mitsubishi MV 1200 S, 15.7”x 11.8”x 8.7”
  • 1 Mitsubishi SX2, 19.6″ x 13.7″ x 10.5″
  • 1 Mitsubishi SX1, 13.7″ x 9.8″ x 8.5″
  • 6 Mitsubishi DWC110C2, 11.8″ x 17.7″ x 10″
  • 1 Mitsubishi DWC90H, 9.8″ x 11.8″ x 6″
  • 3 Mitsubishi 90H1, 9.8” x 11.8” x 6”
  • 3 Mitsubishi DWC90C, 9.8″ x 11.8″ x 6″
  • 2 Mitsubishi DWC90HA, 9.8″ x 11.8″ x 6″
  • 1 Mitsubishi FA10V, 13.7″ x 9.8″ x 8.6″
  • 1 Mitsubishi FA20V, 19.7″ x 13.8″ x 12″
  • 2 Mitsubishi FA10S, 13.7”x 9.8”x 8.6”
  • 2 Mitsubishi BA8 (MDPro2), 12.6”x 9.8”x 8.6”
  • 3 Mitsubishi FX10, 13.7″ x 9.8″ x 8.6″
  • 1 Mitsubishi DWC110SZ, 17.7″ x 11.8″ x 10.4″
  • 4 Mitsubishi DWC90SB, 11.8″ x 9.8″ x 6.9″
CNC conventional EDM machines

  • 1 Mitsubishi EA30E Drop Tank, 48”x33.5”x17.1”
  • 1 Mitsubishi EA28 V  Drop Tank Extend Z axis (17.5”)
  • 1 Mitsubishi EX22FP100
  • 1 Mitsubishi EA12 PS Drop Tank Carbide Circuit
  • 1 Mitsubishi EA 12V Drop Tank
  • 1 Mitsubishi EX8FP60SP Carbide Circuit
  • 1 Mitsubishi M25JC7 G35
CNC hole drilling EDM machines

  • 1 Mitsubishi ED-2000M
  • 1 Current ST300C
  • 1 Belmont ASTEC 2Z400/P3
CNC Machining Centers

  • 1 Mazak V-655 (M32), 26″ x 59″ x 26″, 30 tool changer and touch probe measuring system
  • 1 Mazak VTC-20C (M32), 20″ x 65″ x 20″, 48 tool changer and touch probe measuring system
  • 1 Mazak AVJ-18 (M32), 22″ x 16″ x 18″, 30 tool changer, 10,000 rpm
  • 1 HAAS VF–5-50, 50″ x 26″ x 25″, 30 Tool changer and touch probe measuring system
  • 1 HASS VF4 SS 50” x 20” x 25” through spindle coolant with touch probe measuring
Other Tools

  • 2 Yuasa programmable 4th axis, 8″ x 10″ servo rotary tables
  • 1 Nardini MS1440E lathe with readout
  • 1 Moore number 1 jig borer, fully tooled
  • 1 Sharp vertical mill
  • 1 Mitsui surface grinder, 6″ x 18″
  • 1 Chevalier CNC surface grinder, 12″ x 24″
  • 1 Grob vertical band saw
  • 2 Gamm dry blasters
  • 1 Uni-Tek metal disintegrator
  • 1 HEM CNC saw H130HA-DC 18″ x 20″ capacity

Material Handling Equipment

  • 1 lift truck, 7,000 lb.
  • 1 lift truck, 5,000 lb.
  • 2 overhead cranes, up to 6,000 lb.
Quality Assurance

  • Full quality manual, operating procedures, work instructions, and planned routings.
  • 3 Mitutoyo CNC coordinate measuring machines, 0.000010″ resolution
  • 3 OGP Avant AV300 video measuring systems, 0.000010″ resolution
  • 1 Dorsey 12″ optical comparator, 0.0001″ resolution
  • 15 granite surface plates, up to 48″ x 72″
  • 1 Rockwell hardness tester
  • 2 Haas indexing tables, +/-1 minute
  • Wide variety of inspection hand tools

Adron Tool Corp.

W251 N5490 Business Dr. • Sussex, WI 53089 • Ph: 262-255-4433

© 2022 Copyright Adron EDM Specialists. All rights reserved.